Recent content by wild horse

So I'm about to pick up an aftermarket 4-bbl intake and 4-bbl Holley carb for my 2.8 , Is there anything I should know about them or is it even worth the time ? I'm getting the whole setup for $100.

I would start off by checking all of your electricl connections ,Then check your fuel pump and all the hoses to see if they are tight and make shure the pump is putting out enoug fuel for the motor. when was the last time the vehical had a tune up ?

Well it's been a long time since I been on the site and putting the B2 on the back burner. I have dragged it out and have the motor finished but was woundering if I can get away with just unplugging all the stock electronic stuff ( ecm, feed back carb, and emissions stuff ) ?. Will the...

Your in luck ! I have a spare one.

Ok I'm in real need of the metal plate that goes between the motor and transmission for a 84 b2 with a 2.8 and 5 speed Manuel trans. Mine is shot . Let me know on price and shipping to 98373 puyallup,WA thanks.

Your new carb should not require any tuning.

That carb would be a direct bolt on and should not need anything to be added . I'm going to run the Holley 2-bbl when i do my dura spark convertion.

Ditto on the carb being to big. No more then 325 - 350 max c.f.m. . They only recommend 390 if your running the 4-bbl intake manifold.

I have a spare carb if all else fails. Just let me know.

Hope this helps.

Second picture is a feedback carb.

First picture is a non feedback.

The difference between feedback and non feedback is on the back side of the carb there should be a round selinoid with a 2 wire harness plugged into it. If your doing a dura spark convertion then any 2150 non feedback carb or holley 2 bbl should work fine.

Just woundering if anybody knows how much a bronco 2 body weighs ? Minus the front clip and both doors and rear hatch , Just a general overall weight ? :dunno:

Selling a pair of leveling coils that I just pulled from my rig due to install of 8" lift kit . Nothing wrong with then except dirty from use . gives 1 1/2 - 2" of lift. $150 Fits B2