donzoh1
New member
- Joined
- Jan 26, 2017
- Messages
- 22
- Reaction score
- 0
- Points
- 1
- Vehicle Year
- 1987
- Vehicle
- Ford
I finally got the transmission out and found the flex plate fractured in three places around the center. The six hole center section had broken completely away from the plate. When I removed the bolts, the 6 hole crankshaft spacer fell out (didn't know that was back there). The small raised rim around the center of the spacer was 80% gone so that it no longer holds the spacer in the center of the flex plate. While the bolts will hold it generally in place, I ordered the new spacer from Sonnax figuring this spacer definitely needs to be centered exactly in the new flex plate.
Any thoughts on whether using the old spacer would work?
Any thoughts on whether using the old spacer would work?