freddie2
New member
- Joined
- Apr 22, 2020
- Messages
- 22
- Reaction score
- 4
- Points
- 3
- Vehicle Year
- 1990
- Vehicle
- Bronco II
news of my Bronco, which is going very well, I made him small "home" covers for the front seats in order to preserve them.
I still have this problem of hot start-up which is better since I changed the gas filter, but I only get 1 or 2 tests, if not more juice.
And I had to wake my neighbor the other night at 11:00 because I couldn’t get up my street (it goes up hard) with the snow pressed and frost on top. The 4x4 mode did not want to start, of course the day I needed it the most ...
So I fiddled around to look at this problem. When I press the switch I don’t have any light that lights up and I don’t feel like I’m hearing the sound of the 4-wheel engagement. I removed the lugs to clean them, but nothing. I checked the fuse, it's ok.
Do you have any idea what the problem is?
he had done it to me I think at the beginning of his acquisition and the former owner had given me a process to follow by resetting the box, but I don’t remember the process...
I will soon consider emptying the gearbox (manual) and emptying the bridges.
If you have any ideas to help me solve my little problems, I am of course interested!!
A picture of the 4x4 conversion box: I had a wire that was disconnected by removing the box from its location, was it before? I don’t know, but by reconnecting it, no change...
I still have this problem of hot start-up which is better since I changed the gas filter, but I only get 1 or 2 tests, if not more juice.
And I had to wake my neighbor the other night at 11:00 because I couldn’t get up my street (it goes up hard) with the snow pressed and frost on top. The 4x4 mode did not want to start, of course the day I needed it the most ...
So I fiddled around to look at this problem. When I press the switch I don’t have any light that lights up and I don’t feel like I’m hearing the sound of the 4-wheel engagement. I removed the lugs to clean them, but nothing. I checked the fuse, it's ok.
Do you have any idea what the problem is?
he had done it to me I think at the beginning of his acquisition and the former owner had given me a process to follow by resetting the box, but I don’t remember the process...
I will soon consider emptying the gearbox (manual) and emptying the bridges.
If you have any ideas to help me solve my little problems, I am of course interested!!
A picture of the 4x4 conversion box: I had a wire that was disconnected by removing the box from its location, was it before? I don’t know, but by reconnecting it, no change...