•  

    Click HERE to join our forum and participate in the discussions.

     

I need a fuel pump relay 87 2.9 4pin relay


Broncobenny

New member
Joined
Apr 2, 2019
Messages
8
Reaction score
0
Points
1
Vehicle Year
1987
Vehicle
bronco II (tua)
All shops serial numbers roll over to a new 5 pin relay that doesn't work please help
 


alwaysFlOoReD

Blang - not bling
Forum Moderator
Joined
Apr 13, 2009
Messages
205
Reaction score
45
Points
28
Location
Red Deer, Canada
Vehicle Year
'91, '93, '98
Vehicle
Various
Engine Size
4.0, 4.0, 4.6
Suspension Style
4wd
Can you post a pic of the old one? I'm a visual person.
 

XTC90BII

Active member
U.S. Military - Veteran
Joined
Jul 24, 2016
Messages
343
Reaction score
39
Points
28
Location
NW Arkansas
Vehicle Year
1990
Vehicle
Ford
Engine Size
2.9
Suspension Style
4wd
My credo
Do what you can with what you have where you are
Try a u-pick junk yard.

Dennis
 

Broncobenny

New member
Joined
Apr 2, 2019
Messages
8
Reaction score
0
Points
1
Vehicle Year
1987
Vehicle
bronco II (tua)
I was able to find a new OEM relay on ebay but it did nothing ?? I still straight wire and drive to work could the smaller connections be bad and I have to replace the plug (the link you sent is the plug for the relay) I'm thinking about bypassing and putting a switch under the dash
 

alwaysFlOoReD

Blang - not bling
Forum Moderator
Joined
Apr 13, 2009
Messages
205
Reaction score
45
Points
28
Location
Red Deer, Canada
Vehicle Year
'91, '93, '98
Vehicle
Various
Engine Size
4.0, 4.0, 4.6
Suspension Style
4wd
I'm sorry, electrical is not my strong suit. Hopefully someone else can help.
 

alwaysFlOoReD

Blang - not bling
Forum Moderator
Joined
Apr 13, 2009
Messages
205
Reaction score
45
Points
28
Location
Red Deer, Canada
Vehicle Year
'91, '93, '98
Vehicle
Various
Engine Size
4.0, 4.0, 4.6
Suspension Style
4wd
I'm sure there is a fuse for the fuel, but I don't know which one.
Also, on the passenger side above your left foot under the rug there is a roll-over safety switch. It shuts the fuel off if triggered. There is a reset button on it but they do get weak. You can bypass it temporarily by pulling the connector and jumping the 2 wires. If jumping the wires doesn't fix it then the problem is somewhere else.
 

Top