Ocd Fabrication & Our Bronco Build

[Ocd_Fabrication]

Whats up Corral!

My name is Jason, and I've popped in here from time to time for help, advice, and some cool builds. So it was time op make an account to have conversions with the real people involved directly to the Ford Community. I own and operate a Fabrication Shop here in Northern California and have been a Off-road / Hot Rod enthusiast sense I could walk. Father and grandfather started the family into this industry and now its my generation to keep it going. So without further Jibber Jabber here is out build.

My Gf wanted a truck after a few years of wheeling with me so we started looking around. I got her eyes set on a Bronco ii. We picked this up a few years back and I've been slowly building it for a great On and Off-road Rig. This B2 can take you to church and threw Rubicon the same day! We have taken it threw all of Rubicon and most of Fordyce Trial, along with some occasional fire trails/weekend get a ways. This build progresses every time we touch it and we have no plans on stopping. I am going to start prototyping a few Ranger/Broncoii Parts here in the upcoming year depending on yours and some local responses I get back from them. But enough about that. Here is a Build List and Photo Dump. Glad to be here and start sharing/conversing a little bit more!

1989 Ford Bronco ii
- 2.9L
- Auto / BW1354 ( Stock )
- Dana 30 Front Axle ( Leaf Spring Conversion , ARB 30 Spline Locker , Chromo Shafts , Chromo U joints , High Steer Knuckle , And G2 4.88 Gears )
- Ford 8.8 Explorer Rear ( 31 Spline , Welded Diff , G2 4.88 Gears , Stock Shafts )
- Custom Tube Front Bumper w/ Integrated Spring Hanger ( 1.750 x .120 Wall Dom )
- Custom Tube Rear Bumper w/ Drop Down Tire Swing Out ( 1.750 x .120 Wall Dom )
- Side Tube Protection/Sliders ( 1.750 x .120 Wall Dom )
- Bilstein 12in Front Shocks
- Bilstein 12in Rear Shocks
- Toyota RUF Front Leaf Springs ( Custom Pack )
- Explorer Rear Leaf Springs ( 2 sets built into one )
- 3in Shackles
- Custom Front Shackle Hangers ( RuffStuff 7in Offset Shackles )
- Warn M8000 Winch
- 35x12.5x15 BFG KM3's
- 15x8 Level 8 Wheels ( Dual Valve Stem , Poly Protection Ring )
- 2in Wheel Spacers
- Pioneer Head Unit
- JBL GTO Door Speakers and Rear Speakers
- Memphis Audio Boat Tower Speakers
- RockFord Fosgate 500W 4 Channel ( Powering the rear GTO's and Boat Speakers )
- Complete Interior LED Conversion
- Front Led Head Lights
- Led Tail Light Bulbs
- 3G Alternator
- ARB On-Board Air
- Hi-Lift
- 2in Rear Tub Modification ( For Tire Clearance )
- Long Slip Front Driveline ( Double Cardon 1310 ; Built by DriveLine Services of Sacramento )
- Intake Box Reseal / Watercrossing Clearance
- RLB.com 4ft Whip
- RLB.com Amber Rock Lights
- Piaa Hi-Beam Front Bumper Lights
- Extreme LED Square Reverse Lights ( Wired into Reverse Signal )
- 2.5in Exhaust w/ Flowmaster 10 From the Cat Back

I think that is it but if I do remember anything ill be sure to update it

 

[Moms89]

I have a special love for these Bronco II's.

Thank you very much for posting pics. Looks like you had a lot of fun =)

 

[Ocd_Fabrication]

I have a special love for these Bronco II's.

Thank you very much for posting pics. Looks like you had a lot of fun =)

Yeah me too! I always wanted one and when the wife said she wanted a truck I jumped into finding something I love and she would love. And it worked out perfect. Its fun having her ideas added with my logic and making it a very capable rig. We have so much fun in this thing and plan on building something a little bigger here soon as we don't sleep comfortably in it. We like to sleep in our rigs.

 

[Jim Oaks]

Definitely featured vehicle material:

1990 Bronco II Super Deuce - Bronco Corral

 

[caseygriff]

Real clean rig. I am a huge fan of that slider-to-bumper setup. I'm in socal would you consider fabbin another one for me down the road? Anyway, curious about the leaf spring conversion, is that a personal preference or just a better setup for the BII? I am heavily inspired to get back to work on my 87, just waiting on engine parts. My whole steering/suspension setup needs an overhaul before the trail realistically.

\^^^/