Passenger door window doesnt work.

[RGHELMS]

Ok so my 89 Bii EB has a window that wont roll up or down. You can hear the regulator or motor trying but it sounds like a gear may be slipping or something. Any ideas? Also same door has had two inside door handles break on me. Even when opening it from the outside there seems to be too much resistance when trying to open it. Alot more effort required than on the driver door. Any help is appreciated!

 

[Jim Oaks]

The gear on the window motor might be stripped. You can replace it:

https://www.rockauto.com/en/catalog/ford,1989,bronco+ii,2.9l+177cid+v6,1106187,interior,power+window+motor+gear,10733

Make sure the latching mechanism is lubricated and moving freely. If it's moving freely, you may want to check the door striker for the latch. Maybe it's pulling the door in to tight.

 

[XTC90BII]

The window on my drivers side did the same thing. Cheap fix, new regulator

Dennis

 

[syberdust]

Dennis, are the window regulators easily acquired? My 88 passenger window is slower than my driver side (power) and I think it will become an issue soon. Thanks!

 

[XTC90BII]

syberdust

You can get both electrical and manual from rockauto.

https://www.rockauto.com/en/catalog/ford,1990,bronco+ii,2.9l+177cid+v6,1106198,interior,window+regulator,10217

Dennis

 

[wend3lrt]

Had the same issue. Replacing the window regulator is somewhat easy.

 

[syberdust]

syberdust

You can get both electrical and manual from rockauto.

https://www.rockauto.com/en/catalog/ford,1990,bronco+ii,2.9l+177cid+v6,1106198,interior,window+regulator,10217

Dennis

Thanks, Dennis. Sorry for the delay! Great info!