RBV Doubler - Ballistic Fabrication

[wahlstrom1]

Ballistic Fab is willing to put in the R&D time to make a doubler kit available to us however they need parts (case/tranny) to work with and being as we're asking for them to make the kit they're asking for the donor parts as a start.

I'd be all over this and giving them my spares however I'm in alberta and they're in Arizona. If some one on the board is local to TUCSON ARIZONA and is willing to donate a few parts I'm sure they'd cut you a deal on the finished product.

If interested contact Jeff at:

Ballistic Fabrication
520.888.4441
sales@ballisticfabrication.com

 

[odie1969]

Ballistic Fab is willing to put in the R&D time to make a doubler kit available to us however they need parts (case/tranny) to work with and being as we're asking for them to make the kit they're asking for the donor parts as a start.

I'd be all over this and giving them my spares however I'm in alberta and they're in Arizona. If some one on the board is local to TUCSON ARIZONA and is willing to donate a few parts I'm sure they'd cut you a deal on the finished product.

If interested contact Jeff at:

Ballistic Fabrication
520.888.4441
sales@ballisticfabrication.com

I didnt know that ballist was in az. I might be able to hook them up. I have a few 1350 laying around. and might be making a trip that way.

 

[scubasteve]

PLEASE ask that the kit be in bw150 or 54 to Dana 300 form. A twin BW setup is nice but if were askin for a kit to be made why not go all out?

 

[Mudhound]

Why not a 1350/54 to EB D20. That would be nice to be able to get too. Some people can find the old stuff easier than the new stuff, some times.

 

[wahlstrom1]

Ya gotta start somewhere, and I'm sure after they get a BW twin setup done they'll move into other cases. I'd really like to see a NP241 setup...

 

[scubasteve]

Why not a 1350/54 to EB D20. That would be nice to be able to get too. Some people can find the old stuff easier than the new stuff, some times.

the d300 is along the same lines as a eb d20 except the d300 has a lower low ratio and there is a slightly larger aftermarket.

 

[Chance]

Aw man, if I was closer I would literally pull out my bw1354m out of my truck and donate it to the cause... I got a 1354e layin around but I doubt they'd want that...

 

[F150hybred]

CRIPES! I got both the transfercase and trans sitting here collecting dust. Too bad I'm so far away.

 

[Slingblade]

the thing i need is the shaft to go beetween the doubler and the tcase


Chris

 

[c_note]

the d300 is along the same lines as a eb d20 except the d300 has a lower low ratio and there is a slightly larger aftermarket.

id definitly be leaning towards the d300 combo since theres more stuff out there for them.

someone has to be a pioneer and hook it up with the parts. if i wasnt moving next month, id buy a t-case in Tucson on craigslist and have Jeff or Nate pick it up.

 

[wahlstrom1]

Getting back in contact with Jeff it appears whatever deal he had for parts fell through. If someone in the area has the parts (tranny/cases) and is willing to donate them to the cause (or work a deal with BF) please do so... This would be great for the RBV community, and having a mass produced product that's of high quality would be fantastic....

 

[spdcrazy]

i'm in northern AZ, don't have any extra's T cases, but if someone does up here, i can ferry it back and forth. give me a reason to visit my GF who is working down in tucson.


i'm glad they are willing to work with TRS and RBV guys to get a doubler kit avail. no reason we shouldn't help out anyway we can!

 

[odie1969]

I just emailed them. offering my 1350s one auto one manual. We will see if they still need them. Hope this helps you guys. I really dont need a doubler but I hope this is able to help the community.

 

[86 slo-vo]

ive got a 1350m and a 1354m id offer up and ship if i got them back doubled

 

[odie1969]

I still have not heard from them. Guessing that the doubler is not on their top priority.

 

[spdcrazy]

i'll be headed to tucson on sat, from flagstaff. if anyone in phx is donating their xcase's. i'll grab them and deliever if you want.

i'll call jeff tomorrow and see what he is thinking!

 

[funinthemud]

i've got a d20 and 1350m i'd donate if someone wants to take them from wv. :icon_rofl:

 

[spdcrazy]

any word on this?

 

[spdcrazy]

any new info on this?

 

[86 slo-vo]

x2