Pick up some EFI high pressure hose. I think it's good up to about 100 psi. Make sure to use EFI clamps. The regular ones just won't cut it. My 3.0 idled at about 59psi with the fuel pressure guage hooked up.
On my 72 F series I've got a hard line running from the pump hacked and a soft line...
I ran in the same problems when I shortened my WB to 112".
You can get around the body mounts if you're creative and you outboard the springs a little bit.
I got some 3/8" wall 3x6 rect. tube, cut and knotched it to sit flush on the side of the chassis, and under the chassis a little bit...
And think about the lift you'd get in the very end.
8" suspension + 3" body. 11" of "lift." Lets say you're runnin 31s now and you go to 37s. That's an extra 3" on each side of the tire, giving you 14" of lift.
That's a lot of height at a stock width.
Ok, you get some wheel spacers (I...
I pray to buddah your buddy doesn't daily drive that truck with a 6" body lift, boggin. 6" puts shit tons of strain on your bolts. I'd laugh till I got hemroids to see him take a turn and the cab falls off.
There are obviously pros and cons to everything.
A body lift is cheap, kits are...
There's some sick shit past the Wardolf mine off Guenella pass in George town. A pretty good senic trail with some obsticles and white knuckling towards the end if it's still snowed in or muddy. Takes ya up about 16 thousand feet. You can almost see denver from it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.