•  

    Click HERE to join our forum and participate in the discussions.

     

Latest activity


  • Uncle Gump
    I would do a fuel volume and pressure test. Volume test is easy. Disconnect fuel line from the carb... run line into a see thru bottle...
  • Uncle Gump
    Uncle Gump reacted to wadejake's post in the thread Running Rich with Like Like.
    Copy that, I'll return after doing the ACT and swapping back the old injectors. Thanks for the help!
  • wadejake
    wadejake replied to the thread Running Rich.
    Copy that, I'll return after doing the ACT and swapping back the old injectors. Thanks for the help!
  • Uncle Gump
    Uncle Gump replied to the thread Running Rich.
    You could certainly try... I think you'll be surprised at the results. Check local junk yards for a used set. They can be tested...
  • wadejake
    wadejake replied to the thread Running Rich.
    I still have 5/6 original injectors, one broke upon removal or maybe before hand. I can try swapping them back in. Yeah the ones I...
  • Uncle Gump
    Uncle Gump replied to the thread Running Rich.
    I personally be suspect of the replacement injectors you installed. Hopefully you didn't pitch the injectors you removed and can put...
  • E
    Hey everyone, I have a 1985 b2 with the 2.8 with a Holley 390cfm on it. Just got the carb back from being rebuilt went to start and...
  • wadejake
    Hello, I have a 1986 BII 2.9l 4x4 xlt blah blah blah that has been running rich all winter. On start up, and while running, if you are...
  • G
    G8orFord reacted to BLMPKN's post in the thread My 2023 Big Bend 😎 with Like Like.
    Ordered up some tax time goodies for the Bronc the other day, yahooooo! Stinkyfab skidplates.. front bash guard, under motor, and...
  • U
    I’m rebuilding my 2.8 and wanted to do a complete overhaul on gaskets. I’ve seen some from felpro and different sets but I’m not exactly...
  • BLMPKN
    BLMPKN replied to the thread My 2023 Big Bend 😎.
    Ordered up some tax time goodies for the Bronc the other day, yahooooo! Stinkyfab skidplates.. front bash guard, under motor, and...
  • BLMPKN
    BLMPKN reacted to JerryC's post in the thread My 2023 Big Bend 😎 with Like Like.
    Got it done... These are the less expensive of the two seemingly identical amber fogs on Amazon, $79.99 , that are a direct replacement...
  • tw205
    Got er done! Used the clips and screws that you buy to install license plates and it worked like a champ.
  • Uncle Gump
    Uncle Gump replied to the thread 1988 Bronco II clutch issue.
    I've never had it happen with a clutch... but I've had similar in the brake system. Brakes will work fine... next application it goes...
  • A
    Got er done! Used the clips and screws that you buy to install license plates and it worked like a champ.

Top