Recent content by odie1969

if you can find out how much for the female ends of the seat shipped to 85202 thank for the info.

He did not cut the groves in the lower valance, when he did a Body lift it raised valance.

that would be awesome I could really use it.

Hey Guys I just bought a 99 Mountaineer and everything fine and good till I got home and drove it the next day and the Check Engine light came on. I checked the Codes and they came up as p0171 and p0174 so lean on each bank. I will change the fuel filter to see if that will help. But I...

Since you are working on the 87 I'm guessing you should not need it. the 87 doesn't have RABS. So just throw the rear end under the truck and get going.

It is a sensor for the tone ring. It helps with rear ABS. and speed sensor.

I thought you were trading the truck for the ranger you brother has.

Maybe the old girl just wanted to call it quits, So you might be careful does not take much to go from suicidel to Homicidel. She might just up and take you both out.

Dude You must be from Florida.

O sorry I thought you had a newer truck. But first you should start by removing every thing down to the spindle then remove the pinch bolt. you also might try spraying some kind of penetrating fluid like PB blaster for a couple days prior to the attempted of removal.

$879 for a bj.. WOW. You could get a night of lovin with two chicks for that price. But to do a Ball joint I would deff. buy/rent a Ball joint press. I can do mine in a little under a hr.

Ok it has been a while since I have seen one of these or used a T-case. But if I remeber right the bushing had a round out side as in the pic. but the bushing it self has a square center that fits between the forks. Hope this helps who ever want to make a new one.

A soccer mom with three Kids and a grand child on the way. O ya I'm sure she walks around the trailer in a MooMoo(SP) But now we are done with the jokes. If he thinks the sound is coming from the dist. Look at the shaft or pull the Dist. and check the shaft.

Well you are very well trained for a WOMEN.

Any chance you looked at your plug wires. you might have one or more grounding out.