Most standard tranny drain plugs are just pipe thread. That might be why you cannot find a part number. Most I've seen are 1/4" NPT but this might not be the solution you need.:icon_confused:
The 2 Speed Taurus fan requires two separate circuits for 2 speed operation. Both cannot be activated at the same time or you'll burn up the fan. You mentioned one relay...so thus the question of how you have it wired?
LOL! You guys are too much!
Getting a 'like new' interior will be very difficult with removing the complete dash and properly prepping all the pieces. Vinyl, plastic and metal all require a different method of refinishing.
Post up some pics and maybe someone will come up with an idea!:icon_idea:
A reminder that the A9L and A9P are not interchangeable if using the older EECIV harness. The O2 sensors are a different setup. I'm not an expert enough to tell you how to get the later harness to work, but be careful mixing parts.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.