•  

    Click HERE to join our forum and participate in the discussions.

     

Search results


  1. D

    help last ditch effort......maybe ecm?

    Alright pulled the relay it ran like crap, havent got to carb yet but will eventually try and do it ill keep yall posted
  2. D

    help last ditch effort......maybe ecm?

    Thanks for the replys, ill try and tinker the carb and relay when I lay my son down for a nap later this afternoon Does anyone know what that relay really does?
  3. D

    help last ditch effort......maybe ecm?

    RonD Im not real mech. Inclined but I did take it to two mechanics, I watched one do the timing, it is changing when the rpms advance It will in neutral just seems not as bad It has a little hesitation while driving, not much after 40mph Compression is good, I don't know what blow-by is
  4. D

    help last ditch effort......maybe ecm?

    My 85 b2 is still sputtering and stalling on take off, top speed 75mph downhill: New o2 sensor Tps, iac, egr and position sensor, carburetor rebuilt, plugs and wires, timing good, fuel filter, vac lines, all connectors cleaned, icm, rotors, cap I plugged the tcp vac line and it gets a little...
  5. D

    help me stalling and questions

    Thanks for ur reply. I have not I assumed the mechanic did it after the rebuils.ill take a look at it in the A.M.
  6. D

    help me stalling and questions

    So heres the deal... I am having stalling and bucking issues upon acceleration? I've checked the other threads and have tried everything. Mechanic replaced the tps, iac, rebuilt carb.new egr valve positioner, new tranny rebuild, plugs, wires, air filter, breather filter, fuel filter, valve...
  7. D

    tranny swap? please help

    I blew my transmission last night in my 1985 bronco ii 5sp manual 4wd. I can get a tranny out of a 87 ranger 2wd blue tag on tranny says: e77a 7003 afa, will it work and if so is it just a staight bolt on?
  8. D

    5-Speed Code "5"

    Need help!!!! My transmission crapped out on me last night, yay right! Will a 5-Speed Code "5" out of a 1987 2wd ranger bolt right in my 1985 bronco ii, trans code"5" 4wd? Any help or advice would be really appreciated.
  9. D

    Buying a Bronco II guy says it has a.......

    yea i went and looked at it last night right on the fan shroud it says 2.8l, so he was wrong. i went ahead and bought it. seems a little sluggish and no visible leaks when i looked at it. pretty clean and he rebuilt the tranny,FM145 5 speed with od, i checked out this morning and there is a 3in...
  10. D

    Buying a Bronco II guy says it has a.......

    Buying a Bronco II guy says it has a 3.2l V-6 in it, i am going to drive over and hour this afternoon to check it out and we have been comunicating thru e-mail its a 1985. my question is has anyone ever heard of the 3.2l swap?

Top