How I mounted my gauges on the a-pillar

[chrwilkins30]

I know crappy cell phone pics.

Tell me what you think.

 

[The_Dealer]

Looks pretty cool. I thought about it before. Wat did u use? The rollbar mounts or somethin? I need some aux guages but don't want them under the dash

 

[chrwilkins30]

Yeah I have a sunpro temp in front of the shifter but it will be replaced with a autogage. Mine broke while back and a friend lended me his extra. The mounts are gauge cups. Heres the link where i got mine when i order other things.

http://www.summitracing.com/parts/ATM-2204/

And one on ebay where you will pay just a little less.

http://cgi.ebay.com/ebaymotors/AUTOMETER-BLACK-MOUNTING-CUP-2-1-16-52MM-GAUGE-2204-_W0QQcmdZViewItemQQhashZitem3c9d70fdd5QQitemZ260339465685QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[B2 Addict]

I like it...:icon_thumby: I mounted my tach. basically the same way.

 

[sohc86-06]

looks pretty good man

 

[WesB]

looks good. I am wanting to put a 2 1/2" tach on the dash by the driver side. I already have the 3 guage pod on the middle of the dash. This gives me ideas.

 

[chrwilkins30]

Thanks Guys.

 

[8879ford]

awsome...i was thinkin about the same thing

 

[The_Dealer]

I got my podds today, did u use the center hole or the back on on the pod stand to get it angles right towards u? Holding it up if I use the center hole the stand will look right but the won't come far enough in to look right. But if I use the back hole it wil, but the front will be slightly off the pillar. U think u could slide the pod out of the stand and shoot me a pic?

 

[B2 Addict]

I got my podds today, did u use the center hole or the back on on the pod stand to get it angles right towards u? Holding it up if I use the center hole the stand will look right but the won't come far enough in to look right. But if I use the back hole it wil, but the front will be slightly off the pillar. U think u could slide the pod out of the stand and shoot me a pic?

I didn't use the pods on mine, I just bought the mini tach at Autozone that has the bracket. I just pulled the A-pillar, drilled a hole, angled it where I wanted it & tightened 'er up.....:icon_thumby:

Figured I would give you a free bump so the O.P. has a better chance to see it.....:icon_thumby: