E.B.N.S
New member
- Joined
- Jan 16, 2024
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Vehicle Year
- 1986
- Vehicle
- Ford Bronco II
My first post on the forum so sorry if I forget to include something. I recently traded for a Bronco 2 and completely redone the fuel system (new tank, pumps, and filter).
Now that I know I have fuel I have to get spark. When I got the car the ignition timing was 180 degrees out so I fixed that and I have 12 volts and a spark at the coil i tested spark plug #1 and I get one spark when I turn the engine over but no sparks after that. Any advice would be appreciated
Now that I know I have fuel I have to get spark. When I got the car the ignition timing was 180 degrees out so I fixed that and I have 12 volts and a spark at the coil i tested spark plug #1 and I get one spark when I turn the engine over but no sparks after that. Any advice would be appreciated