Howz the tongue connected? Looks higher than mine. I used the frame rails--notching them at the flanges and bending them in and welding up the notches.
Right ahead of the cabmounts I cut the frame off then used 3" x 3" box tubing for the tongue. I welded the tubing to the cross brace that runs between the front spring hangers and then notched the cross brace that runs between the rear cab mounts and welded it in. I braced it up with angle iron running back to the frame v'ed to the tongue. I wanted it to sit level hooked up to my bronco with lift and tow hitch that is built into the bumper.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.