Transfer case info? 1350M

[88BII got it for $250]

Ok, i would like to know if the 1350m on my 88BII will bolt up to a 5speed from a F150? the reason i would like to know is i am about to start the 5.0swap later this week, and at the last minute decided to go with a 5speed instead of the aod.....and the you pull it wants more for the transfer case then the trans.

P.S. i know i will need the computer and wireing harness from the f150 also.

 

[AllanD]

No.

the ideal t-case to use is a Dana20 off of a shobox Bronco with a C4,
but finding one of those...

Next best choice would be an NP205.

Not much reduction, but compact and essentially a bulletproof.



AD

 

[Josh40601]

No.

the ideal t-case to use is a Dana20 off of a shobox Bronco with a C4,
but finding one of those...

Next best choice would be an NP205.

Not much reduction, but compact and essentially a bulletproof.



AD

Jeep CJ's also used Dana 20's. Those are A LOT more common, but i dont know if the output shaft on the trans is the same as the ford. I put a Ford T18 trans to my Jeep Dana 20 T-Case so it might work.