Search results

my 86 is running like crap ive noticed that the fuel pump runs constantly and truck seams to be over fuel like crazy its blowing black smoke and the plugs are black. ive tried scanning for codes with the jumper wire trick but couldn't get anything out of it. what controls the fuel pump shut off...

does anyone know if the door latch striker bolts are available for the rear hatch cant seam to find them anywhere ?

Soo i picked up a set of doors for my b2 to make half doors does anyone have any pics of there half door builds? looking for some ideas on how to mount the door handles inside and what people did for the inside door skin

i changed the pinion seal on the rear axle of my bronco 2 and cant find the torque spec anywhere

hi all so my egr tube broke in my 86 at the manifold and im having trouble finding a new tube ive tryed lmc and the local auto parts stores im thinking of just deleteing it all together and wondering what i would have to do short of blocking of the egr ports and unplugging the valve.

looking into making half doors or tube doors and not sure witch one i would like to make for my b2. wanted some input and maybe pictures for some ideas . im kinda leaning to half doors but pics of both would be much appreciated thanks

so i plan on doing the 4L clutch swap in my 86 b2 in the near future due to the fact that my clutch crapped out. wanted to know if i should go with a ceramic clutch or a plain jane oem replacement? also if theres any specific brand or stage that work the best for a DD weekend wheeler. any other...

hey guys im having a hard time finding a drives for latch for my 86 ive tryed lmc and rock auto and neither show anything for my 86 anyone no where i could find one other then a wrechers?

having trouble finding larger then 2 3/4 alinment bushings for my 86 b2 just wondering if anyone could send me a link or something would be great. ive tryed napa and a local auto parts store that i deal with throw work but i havent had any luck soo it would be much appreciated thanks

soo lately ive been having probblems with my truck starting after it sits over night it will fire right up no problem but then stumbles like it wants to die out then it will pick back up and idle fine. when i started it this morning but when it did it thismorning it died and i had to restart it...

i recently found a 5.0 out of a 87 crown vic that a buddy has and is pulling out. the engine comes with full wiring harness and he only wants 100 bucks for it. he says it runs great (soo im told) but theres no transmisson. i wanted to no what would the best transmisson to put behind this if...

soo i have come acrossed a 8.8 limeted slip out of a 05 crown vic police interceptor im pretty sure it is a coil spring suspenion instead of air bags and i could pic it up really cheap if not free from a buddy just wanted to know if anyone has done this swap with this setup other then the leaf...

i recently had my ( cv garbage ) in my 86 b2 break i found the conversion shaft on bronco graveyard just wondering if anyone is using it and if theyve had any problems with fit or anything like that. it will be going behind my 5spd with manual t-case...

so i recently got a set of 2.5" lift coils for the front of my 86 b2 4x4 and am going to get blocks for the rear just wanted to know if the stock shocks will work with this set up and how much this will jack the front into a v and if soo will the caster camber blocks will fix this problem ? thanks

what should the fuel pressure be on the rail in my 86 with the 2.9l?

my 86 has crusie but it isnt workin i have vacumm at the vacuum controller but it dosent do anything is there a way to check the signal stat for power? or any comin problem with the system?

i found a set of seats from a 93+ ranger wanted not no if they will fit in my 86 b2?

might be a stupid question but im lookin into a 4'' lift (rought country) for my 86 b2 just wanted to no if i need to extend my brake lines