bronco_lou
New member
- Joined
- Mar 17, 2009
- Messages
- 79
- Reaction score
- 1
- Points
- 0
- Location
- Columbia, SC
- Vehicle Year
- 1988
- Vehicle
- Ford
- Engine Size
- 94 explorer 4.0
Hello all, I have a 88 bronco II that I just swapped in a 94 4.0, the truck has the complete wiring harness from the 94 explorer. I just cranked it up for the first time tonight and it’s not running on cyl 2 and 6. The engine was pulled about one year ago from a rolled explorer and has sat in a garage until I got it a few weeks ago. I am getting spark on 2 and 6, I pulled the plugs and they are not wet, and when I pull the plug wires while running no change in motor rpm at all. I checked the ohms and they are within specs. Is there a way to test the injector while it’s still on the motor or will I have to pull them to test? What are your thoughts on the injectors maybe stuck from sitting?
Thanks,
Louis
Thanks,
Louis