- Joined
- Nov 23, 2007
- Messages
- 0
- Reaction score
- 0
- Points
- 0
- Location
- Cheyenne
- Vehicle Year
- 2002 1988
- Vehicle
- honda and ford
- Engine Size
- 2.4l/5.0
how hard would it be to install a 4.0 SOHC/auto out of a 99 exploder 4x4 into a 89 bronco II 4x4, wiring being the main concern, obd 1 setup to obd 2, i don"t want to change the dash, or anything, want to keep the gen 2 dash,
does the 4.0 OHC engine mounts work? would i need both parts the block mount and the engine cradle mounts?
just thinking, found a wrecked 99 explorer thinking of picking up, and being my 5.0 needs rebuilt and the 4.0 sohc puts out about the same if not more HP i was just kinda curious.
if i can"t get this 5.0 running tommarrow might go look at the exploder,speaking of which does the 99 use pats?
does the 4.0 OHC engine mounts work? would i need both parts the block mount and the engine cradle mounts?
just thinking, found a wrecked 99 explorer thinking of picking up, and being my 5.0 needs rebuilt and the 4.0 sohc puts out about the same if not more HP i was just kinda curious.
if i can"t get this 5.0 running tommarrow might go look at the exploder,speaking of which does the 99 use pats?
Last edited: