G8RB8
New member
- Joined
- Sep 9, 2009
- Messages
- 16
- Reaction score
- 0
- Points
- 0
- Location
- Greenville, SC
- Vehicle Year
- 1988
- Vehicle
- Ford
- Engine Size
- 2.9L V6
Like in the auction here?
http://cgi.ebay.com/ebaymotors/Light-Brown-Dash-Cover-Ford-Bronco-II-82-83-84-85-86-87_W0QQcmdZViewItemQQhashZitem414aec0102QQitemZ280429854978QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
I've basically given up on finding a near perfect (no cracks or warps) dash for my '88 BII, so I was interested in seeing if any of you have gone this route, and what I could expect.
What I'm concerned with is that if it's something that just fits over what I have now, that it may not work. My windshield leaks, and there's a part of the dash top that's warped up a little bit, and I'm afraid that it won't fit properly. It's not drastic or anything, but it's definitely not straight.
Just wondering what your experiences are with a product like this. I'm also interested to see if this could be a replacement period. . . as in can I separate my current dash cover from the foam material it's adhered to, and use the "cover" as the dash?
On the Searches I did, I found a couple people asking the same question, and one thread that touched on it but still didn't really give a great idea. . .
If anyone can point me in the right direction of an old thread that I have not been able to find, please link as well
Thanks guys :icon_cheers:
http://cgi.ebay.com/ebaymotors/Light-Brown-Dash-Cover-Ford-Bronco-II-82-83-84-85-86-87_W0QQcmdZViewItemQQhashZitem414aec0102QQitemZ280429854978QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
I've basically given up on finding a near perfect (no cracks or warps) dash for my '88 BII, so I was interested in seeing if any of you have gone this route, and what I could expect.
What I'm concerned with is that if it's something that just fits over what I have now, that it may not work. My windshield leaks, and there's a part of the dash top that's warped up a little bit, and I'm afraid that it won't fit properly. It's not drastic or anything, but it's definitely not straight.
Just wondering what your experiences are with a product like this. I'm also interested to see if this could be a replacement period. . . as in can I separate my current dash cover from the foam material it's adhered to, and use the "cover" as the dash?
On the Searches I did, I found a couple people asking the same question, and one thread that touched on it but still didn't really give a great idea. . .
If anyone can point me in the right direction of an old thread that I have not been able to find, please link as well
Thanks guys :icon_cheers:
Last edited: