ronclark
New member
- Joined
- Oct 22, 2008
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Location
- Woodland, WA
- Vehicle Year
- 1987
- Vehicle
- Ford
- Engine Size
- 95 4.0 with 93 ECU
-
Click HERE to join our forum and participate in the discussions.
Automatic Four Wheel Drive Control Module
- Thread starter AledoGYoung
- Start date
AledoGYoung
New member
- Joined
- Apr 29, 2013
- Messages
- 24
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Vehicle
- Ford
Thanks for the help!!!
bfiakas
New member
- Joined
- Jun 2, 2009
- Messages
- 147
- Reaction score
- 1
- Points
- 0
- Location
- Gilbert AZ
- Vehicle Year
- 1988
- Vehicle
- Ford
- Engine Size
- 2.9l
The same 4x4 module is used in the Explorer up to 1995.They're locatated in the left rear cargo panel. The Bronco2s 8 wire plug that plugs into the module gets brittle and the wires will pull out and shut the 4x4 system off. I just filled the top portion of the plug head with silicone to keep the wires in place and haven't had a problem since.
AledoGYoung
New member
- Joined
- Apr 29, 2013
- Messages
- 24
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Vehicle
- Ford
Thanks for the help! I checked the plugs and they looked good. I don't think it is the plugs because the 4x4 doesn't ever shut completely off it just doesn't get the signal the the shift motor and transfer case is in 4 wheel so it takes it back into 2 wheel. It inly does this sometimes.