Body Mounts

[Pelzworld]

Looking on where to obtain hardware for the front frame to core mounts. The previous parts were literally rusted & destroyed. The washer/spacer setup had a hexagon part that goes into the bushing itself......I've seen several hardware "kits" but none that had this part. Any work around suggestions are welcomed.

 

[bronco2fan]

Here ya go. Do them all.

https://www.dufftuff.com/Body_Mounts_Ford_Bronco_II_p/6394.htm

 

[Pelzworld]

Here ya go. Do them all.

https://www.dufftuff.com/Body_Mounts_Ford_Bronco_II_p/6394.htm

I ordered the mounts from there, but does their hardware kit come with the specified octagon washers needed that fit up into the mounts?

 

[bronco2fan]

Honestly I can't remember. I know I had no problem with the install. By looking at the enlarged photos you can see they have inserts in the bushings. Just remember this isn't the hardware for a lifted BII. It's normal ride height.

I posted my install on the Ranger forum awhile ago.

Sent from my LG-LS998 using Tapatalk