Wild Willy
New member
- Joined
- Apr 25, 2013
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- Springfield, VA
- Vehicle Year
- 1989
- Vehicle
- Ford
- Engine Size
- 2.9L
New member here...have an 89 Bronco II that I bought at an impound auction. Wasn't getting gas to the engine so dropped the tank and it was really nasty inside so I cleaned it out and replaced the fuel pump and fuel filter. While doing so, the connector tieing the fuel supply line to the fuel pump broke. I ordered a replacement from Jeff's Bronco Graveyard but the inside diameter of the line on my truck is smaller than the one provided. The union will not begin to fit, even with soaking the line in very hot water for a while. Inspecting closely, it looks like the line is double walled. I know there is a smaller size kit out there. Wondering if a smaller union in the smaller line will inpede fuel flow or should it be all right? Alternatively, if there's a kit to replace the line from the fuel pump to the fuel filter I would try that. Thanks for any help...
WW
WW