Bronco II GVWR

[Bronco_Chuck]

I just wanted to know if any body knew the Gross vehicle weight rating for a 84 bronco 2?

thanks.

 

[BDAB]

um something like 10 pounds. don't try to tow a whole lot with it until you go through the transmission.

 

[Bronco_Chuck]

im sorry i ment the weight of the vehicle. not how much it can pull.

 

[Jorley]

Mine tipped the scales at around 3300 lbs.

 

[Wicked_Sludge]

gross vehicle weight is the weight the truck will weigh when fully loaded with the maximum legal load.

what your looking for is called curb weight.

 

[Jorley]

Yeah, I should have mentioned that in my other post. That weight(3300 lbs) is totally empty and about 1/4 tank of gas.

 

[CopyKat]

The GVWR should be on the door sticker on the Drivers door.


Mine says 4180 Lbs

 

[sweetwaterbroncoII]

You can find that information by decoding your VIN......if the 4th letter is A it is up to 3000 lbs, if its B 3001-4000 lbs, or if its C 4001 lbs and up....

 

[tucking30s]

If the curb weight is 3000-3400 lbs, what is the weight of the front vs. rear of the vehicle?

 

[4x4junkie]

The GVWR rating on my '90 is 4360lbs.

Weight distribution (unladen) is very close to 50-50% on a BII.

 

[dirtsquirt]

If the curb weight is 3000-3400 lbs, what is the weight of the front vs. rear of the vehicle?

Look around for a truck stop or commercial truck scale along a hi-way, most truck stops have a scale u can get your front axel, rear axel and truck weight to your set up.

 

[AllanD]

I just wanted to know if any body knew the Gross vehicle weight rating for a 84 bronco 2?

thanks.

It's printed right on the safety and compliance label on the
end of your driver door.


AD

 

[B2 Addict]

My 84 says GVWR 4160 pnds on the door sticker.
GAWR for front is 2120.
GAWR for rear is 2390.

Guessing GAWR is gross axle weight rating.