•  

    Click HERE to join our forum and participate in the discussions.

     

Bronco2 90 stock max tire Size 15x8 ??????


buzz88

Member
Joined
Jan 25, 2009
Messages
62
Reaction score
0
Points
6
Vehicle Year
1990
Vehicle
Bronco II
Engine Size
2.9L
Anyone know the max tire size to run on a 15x8 wheel on a 90 Bronco II. I ran 30x9.5x15s on my 88 but it had a 2 in suspension lift in the front, can I get away with that for normal driving no real off roading, on a 90 b2 without any lift???? thanks
 


91rangerxlt

New member
Joined
Dec 16, 2008
Messages
37
Reaction score
0
Points
0
Location
kansas
Vehicle Year
1996 and 2002
Vehicle
ford
Engine Size
4.0 ohv and sohc
i had 30x9.5x15 on my stock ranger rims and it was a 90, i think you could fit 31x10.5s on it you might have a little rub at full turn but that should be it, my truck was just stock and sagging leaf springs and it had no prob with the 30'' tires
 

WesB

New member
Joined
Jun 6, 2010
Messages
98
Reaction score
1
Points
0
Location
Tyler, tx
Vehicle Year
1984
Vehicle
Ford
Engine Size
2.8
I have 235/75/15s with little rubbing, but I've got mb razors for a jeep so it has very little or negative offset. The same tires had no rubbing issue at all with the factory 15x6 wheels.
 

buzz88

Member
Joined
Jan 25, 2009
Messages
62
Reaction score
0
Points
6
Vehicle Year
1990
Vehicle
Bronco II
Engine Size
2.9L
yeah I want 15x8 wheels which I had on my 88, gave it a good wide stance, but i guess it will depend on the offse of the rims, i saw some general grabber ta tires in size 255 70 15, which are basically 29x9.5 15s ...
 

Boggin

New member
Joined
Nov 3, 2007
Messages
0
Reaction score
1
Points
0
i have a friend who used to run 32x11.50s on his 89 B2 which had just heavy duty stock height coil springs and only rubbed at full turn or full stuff of the fenderwell
 

greasemonkey6886

New member
U.S. Military - Veteran
Joined
May 13, 2010
Messages
157
Reaction score
0
Points
0
Location
Sulphur Springs, Tx.
Vehicle Year
88,89,07
Vehicle
Ford
i dont know how they will ride and drive yet but if you look at my build thread you will see 31x10.50x15's on stock alum wheels. they fill the fenders quite a bit and I am afraid that they will rub a lot. The Bronco has factory sprins and no lift at all at this point.
Paul
 

Top