•  

    Click HERE to join our forum and participate in the discussions.

     

Fuel Gauge opposite issue


89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
This thing is pegged at Full. New sending unit..... Any ideas? Next I have zero wipers...... just starting down that rabbit hole....
 


tw205

Active member
U.S. Military - Veteran
Joined
Jan 23, 2011
Messages
335
Reaction score
125
Points
43
Location
Bronson michigan
Vehicle Year
1985
Vehicle
Ford
Suspension Style
4wd

Did your turn signals just quit or have they never worked?
 

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
Turn signals work perfectly.
 

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
They haven’t worked. I have power at the fuse block. Not after the switch in the engine bay.
 

tw205

Active member
U.S. Military - Veteran
Joined
Jan 23, 2011
Messages
335
Reaction score
125
Points
43
Location
Bronson michigan
Vehicle Year
1985
Vehicle
Ford
Suspension Style
4wd
They haven’t worked. I have power at the fuse block. Not after the switch in the engine bay.
When you push the washer, does it work? Both washer and wipers are part of the multi switch in the column.
 

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
No. Neither functions at all.
 

tw205

Active member
U.S. Military - Veteran
Joined
Jan 23, 2011
Messages
335
Reaction score
125
Points
43
Location
Bronson michigan
Vehicle Year
1985
Vehicle
Ford
Suspension Style
4wd

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
Will do. Thank you. Any thoughts on the fuel gauge?
 

tw205

Active member
U.S. Military - Veteran
Joined
Jan 23, 2011
Messages
335
Reaction score
125
Points
43
Location
Bronson michigan
Vehicle Year
1985
Vehicle
Ford
Suspension Style
4wd
Will do. Thank you. Any thoughts on the fuel gauge?
Did you put the new sending unit in because it alway registers full or did the problem come after the new sending unit?
 

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
It’s after the new unit was installed. Before it was registering empty.
 

tw205

Active member
U.S. Military - Veteran
Joined
Jan 23, 2011
Messages
335
Reaction score
125
Points
43
Location
Bronson michigan
Vehicle Year
1985
Vehicle
Ford
Suspension Style
4wd
I would suspect the new sender is the wrong one. Pre 89 low ohms was full tank. 89 changed to high ohms full. If you can take the connector off the tank and put a ground on the yellow wire it should make the gauge go to empty or even past empty. The yellow wire is the ground to the fuel gauge.
 
Last edited:

89XLT

New member
Joined
Feb 9, 2024
Messages
7
Reaction score
1
Points
3
Vehicle Year
1989
Vehicle
Ford Bronco II
Genius! I’ll try that tomorrow! Thank you!!
 

Top