•  

    Click HERE to join our forum and participate in the discussions.

     

Help me guys


schroader

New member
Joined
Aug 14, 2007
Messages
117
Reaction score
0
Points
0
Age
42
Location
ky
Vehicle Year
1984
Vehicle
Ford
Engine Size
4.0
I got me a bronco II. Its an 88 4x4 with 2.9. When I got it, it missed a little bit but I changed pjugs and wires and it quit. But it wants to idle upand down and when you come to a fast stop it will dye. But when you come to a slow stop it dosent miss a lick.. I know its a sensor or something simple but I dont know witch one.
 


177CIOfPureLove

New member
Joined
Oct 25, 2007
Messages
0
Reaction score
0
Points
0
Location
Bayville, NJ
Vehicle Year
1989
Vehicle
Ford
Engine Size
2.9L
I think it could the the Idle Air controller (IAC) I had this problem in another truck. Quite simple to remedy, its the long round thing bolted to the upper intake on the passenger side. Take it off and get a good can of throttle body cleaner, spray it inside and make sure to get all of the black crap out. Most times that does it. If not there kinda expensive.
 

TheOne

New member
Joined
Nov 18, 2009
Messages
33
Reaction score
0
Points
0
Location
Edmonton, Alberta
Vehicle Year
1987
Vehicle
Ford
to add take the 2 screws on the sensor out and pull the 2 pieces apart GENTLY then go to town spraying both

even better try and find a new one at the j yard! cured my erratic idle :yahoo:
 

Top