- Joined
- Aug 8, 2007
- Messages
- 38
- Reaction score
- 1
- Points
- 0
- Age
- 58
- Location
- Shawnee, Oklahoma
- Vehicle Year
- 1989
- Vehicle
- Ford
- Engine Size
- 4.0
I just put the dana 35 beams with 44 outers on my bronco II and when I installed the lock out hubs I spun the axles and they are not disengaging. Please tell me what I did wrong??
I bought the beams from 97TrailRigDD and it came with everything but the 3rd member. The lock outs are Selectro hubs. I took everything apart and cleaned and greased. Put it back together (I thought correctly) but like I said they are not disengaging.
On the Warns that I had on my Dana 35 when I disengaged I could spin the axles and they wheel wouldn't turn or I could drive without the axles turning. I assumed that these Selectro's would perform the same??
Any ideas???
Steve
I bought the beams from 97TrailRigDD and it came with everything but the 3rd member. The lock outs are Selectro hubs. I took everything apart and cleaned and greased. Put it back together (I thought correctly) but like I said they are not disengaging.
On the Warns that I had on my Dana 35 when I disengaged I could spin the axles and they wheel wouldn't turn or I could drive without the axles turning. I assumed that these Selectro's would perform the same??
Any ideas???
Steve
Last edited: