OregonMudder
New member
- Joined
- Apr 21, 2010
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- Milton-Freewater OR.
- Vehicle Year
- 1984
- Vehicle
- FO MO CO
- Engine Size
- 2.8
well i searched and didnt come up with many hydro assist ps box taps so i thought id post mine up i just compleated for my 84 bronco 2
I used steel 1/4" npt to jic fitings, pre drilled the holes with a 1/4" bit then steped up to a 7/16" bit and taped it with a 1/4"-18NPT tap.
I used a 90 degree fiting for my left turn port for better motor clearance
I used steel 1/4" npt to jic fitings, pre drilled the holes with a 1/4" bit then steped up to a 7/16" bit and taped it with a 1/4"-18NPT tap.
I used a 90 degree fiting for my left turn port for better motor clearance
Last edited: