90rangersuper
New member
- Joined
- Oct 26, 2007
- Messages
- 0
- Reaction score
- 0
- Points
- 0
- Location
- Pittsville,WI
- Vehicle Year
- 1990
- Vehicle
- Ford
- Engine Size
- 4.0
just pulled my m5od out today to fix my f-up with the pilot bearing, same thing, came out fine, about 5 minutes from being upbolted it was out, Y pipe in there, putting it in took about a half hour, could not get the input shaft in the pilot bearing, finally after about a half hour it went in, the one trick i used was taking a ratchet strap around the y pipe on the bottom to bring it down, tilted up and wam, it went over the cross pipe, so far i have removed the auto, and put the manual in twice and taken it out once without removing the y-pipe, truck is totally stock - no lift at all.