G-Dirty
New member
- Joined
- Dec 26, 2015
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Vehicle
- Ford
I recently did a compression test on my 1988 Bronco 2 and determined that one of my injectors is stuck open. I figure I need to replace all my injectors and found some sets of Accel injectors for a good price. The flow rates range from 15 lb/hr to 30 lb/hr.
I have a stock 2.9 engine and don't plan on doing many performance upgrades. I found a calculator online and it looks like I need a flow rate of 14.6 lb/hr for the 140 hp rating. Are there any pros or cons to increasing the injector size? I was thinking about getting 19 lb/hr injectors.
Thanks
I have a stock 2.9 engine and don't plan on doing many performance upgrades. I found a calculator online and it looks like I need a flow rate of 14.6 lb/hr for the 140 hp rating. Are there any pros or cons to increasing the injector size? I was thinking about getting 19 lb/hr injectors.
Thanks