abrush
New member
- Joined
- Oct 30, 2007
- Messages
- 40
- Reaction score
- 0
- Points
- 0
- Location
- Nebraska
- Vehicle Year
- 1988
- Vehicle
- Ford
O.k., I have a question regarding the installation of an aftermarket temperature guage. I have a 1988 Bronco II with a 4.0L engine out of a 1994 Explorer. My temp. guage has acted up ever since I did the swap several months ago. It moves up and down constantly. I know the temperature of the engine is not changing because I have used a temperature laser several times on it and get the same reading. So here is my question....
I have heard that you can confuse the engine computer if you do away with the existing temperature sending unit. The aftermarket guages I have seen require installing a new sending unit. My intake manifold only has one spot for this so how could I find a guage that I could make work without having to eliminate my dash guage?
I have heard that you can confuse the engine computer if you do away with the existing temperature sending unit. The aftermarket guages I have seen require installing a new sending unit. My intake manifold only has one spot for this so how could I find a guage that I could make work without having to eliminate my dash guage?