Dugan
New member
- Joined
- Apr 5, 2012
- Messages
- 8
- Reaction score
- 0
- Points
- 1
- Location
- New Castle, DE
- Vehicle Year
- 1989, 1949
- Vehicle
- Ford, IH
- Engine Size
- 2.9L, 355 SBC
I'm building a 86 b2. When we removed all the wiring to reinstall it later we are missing part of the harness for the NSS.
I have a round 5 pin connector and a 3 prong along with a bare NSS (red/blu) wire on the solenoid and a large black/org wire off solenoid. It's all on pass side. Can some one get photos of where these go? I believe some went to trans but I'm lost.
I have a round 5 pin connector and a 3 prong along with a bare NSS (red/blu) wire on the solenoid and a large black/org wire off solenoid. It's all on pass side. Can some one get photos of where these go? I believe some went to trans but I'm lost.