My build thread

[Harley]

How did you fix the striker pin for the back hatch? I'm having the same troubles

i found a bushing that was the same outer diameter as the sleeve thing on the other striker and drilled it out to fit the pin....worked great...i used a plastic type of bushing hoping it would be a little more quiet.

 

[shadow88]

Thanks!

 

[shadow88]

I'm using the same pitman arm as you the fa600, is you drag link touching your outer left tie rod?

 

[Harley]

I'm using the same pitman arm as you the fa600, is you drag link touching your outer left tie rod?

No...it's real close though

Sent from my SM-N900P using Tapatalk

 

[shadow88]

If you can take a pic, I'm thinking I might have to do something different

 

[Harley]

No...it's real close though

Sent from my SM-N900P using Tapatalk

How much lift do you have? Maybe you need the 400 arm?

 

[shadow88]

4"

 

[Harley]

4"

Oh...that might be why...hope not

 

[shadow88]

is it this close?

 

[shadow88]

 

[1RangerNut]

My steering is real close to touching also with a 4" lift.

 

[shadow88]

Mine is touching, it's rubbed it to clean metal

 

[shadow88]

Ranger nut what pitman arm are u using?

 

[1RangerNut]

Fa600

 

[Harley]

finally got that nasty muffler replaced, now it sounds good! next weekend if its nice, im going to rip out the interior and clean the carpets and redo the headliner...looking forward to that...

 

[smccrory60]

I should have my new headliner material later this week. I'll let you know how installing it goes!

 

[Harley]

I should have my new headliner material later this week. I'll let you know how installing it goes!

Cool..I'll be looking forward to hearing how it went...

 

[Beachbuggy]

I should have my new headliner material later this week. I'll let you know how installing it goes!

I did mine for the first time recently, my suggestions:
1. Glue, lots of glue
2. Go slow
3. Glue, lots of glue

 

[smccrory60]

Hopefully 2 cans of adhesive is enough. Got 2.5 yds. of fabric and the glue on that auction site for $62.

 

[Harley]

What site did you get it from?