Danno87
New member
- Joined
- Jun 5, 2012
- Messages
- 24
- Reaction score
- 0
- Points
- 0
- Location
- Bozeman, MT
- Vehicle Year
- 1987
- Vehicle
- ford
- Engine Size
- 2.9
So I'm hitting this thread a bit late in construction but I can fill in as I go. I'll post some pics of the progress and be sure to post more as I go. As soon as I figure out why it fails to upload.
I need help on a few things before I dump anymore cash on this build. So here goes enjoy and if you have any ?? Or comments Just feel free to let me know.
My first problem is the fuel sending unit. I have a pick and pull unit that may be bad. I found a yellow and white wire I presume is the gauge lead on the drivers fender well of the 91 explorer and have proper ground but my gauge still pins out at full tank no response. At this point I am willing to rewire the entire thing from dash to tank lol. Is the 87 b2 sending unit even compatible? What could I be doing wrong and how would I test the gauge before I replace the unit?
I need help on a few things before I dump anymore cash on this build. So here goes enjoy and if you have any ?? Or comments Just feel free to let me know.
My first problem is the fuel sending unit. I have a pick and pull unit that may be bad. I found a yellow and white wire I presume is the gauge lead on the drivers fender well of the 91 explorer and have proper ground but my gauge still pins out at full tank no response. At this point I am willing to rewire the entire thing from dash to tank lol. Is the 87 b2 sending unit even compatible? What could I be doing wrong and how would I test the gauge before I replace the unit?
Last edited: