Radiator swap questions

[jules]

I put in a dual core radiator, but now the lower hose is kinked a little. I’ve taken about 1.5” off, but the new angle of the radiator seems to be linking the hose no matter what. Is this a big deal? How should I handle this? These hoses seem to come pre-formed. Did I make a mistake on choosing a larger radiator? Thanks!

 

[tw205]

Yes, that is gonna be a problem. You will not get proper flow. I also have a double core in my rig. Spend some time looking at hoses from similar vehicle ( rangers and early 91-94 explorers.). You will find hoses that are shaped a bit different to correct the issue.

 

[JerryC]

The hose looks wrong. My 88 has an extra bend on the radiator side.
Dealer put the radiator and hose on several years ago so I can't be 100% sure that it is an OEM shape replacement.
But you can get the parts house to pull a hose for an 88 and check it out.

 

[jules]

I ended up just buying a flexible hose and sticking it on there. So far so good!