rear spring hangers

[pimtool]

Will the rear spring hangers from the 90 to 04 rangers work for a 89 bronco2?

The ford parts man told me the rear hangers for the B2 are obsolete and not available, he said he has no dimensions so I cant measure to see if it will fit.

Thanks.

 

[bobbywalter]

i just make them work.


bolt the bottom on and use a stepdril for the new top holes.

to be perfect you need to space em out about a half inch....i am not perfect with my junk but if i was working on someone elses i would space em out.

 

[pimtool]

Thanks.
Yeah this thing is a pos that is just gonna be driven around in the woods, so no need for perfection.

 

[chazzone]

New hangers, $25 from LMC...
http://www.lmctruck.com/icatalog/fr/full.aspx?Page=113

 

[pimtool]

I dont know about the lmc hanger, because the one I got from ford for the ranger had different spacing on the bolt holes. I did like bobbywalter said and drilled them out. worked great.

 

[veefer800canuck]

I bolted mine on temporarily with just the two bottom bolts, then drilled out the two top holes to match, using the spring hanger as a guide.

Easy peasy.

You can see the old top holes out further:

 

[bobbywalter]

New hangers, $25 from LMC...
http://www.lmctruck.com/icatalog/fr/full.aspx?Page=113

dude....did you see how much a b2 hanger cost:icon_rofl:


supply and demand....


fawk..... you could buy a plasmacutter/welder setup for less then a set of those list and make some real hangers

 

[Shran]

dude....did you see how much a b2 hanger cost:icon_rofl:

Dear god. Someone would make a fortune selling fabricated ones at even $50-75 after seeing those. I bet LMC is about the only place that carries them too.

FWIW, RockAuto has the Ranger rears for $14.22 each.

 

[lil_Blue_Ford]

dude....did you see how much a b2 hanger cost:icon_rofl:


supply and demand....


fawk..... you could buy a plasmacutter/welder setup for less then a set of those list and make some real hangers

Fawk... $395 each and you still have to pay shipping....