Tranny Cooler for Explorer

[94EXPLODER]

Has anybody installed a tranny cooler on their Ranger or Explorer?...if so any pictures
Thanks:icon_thumby:

 

[5.0]

If a stock size cooler will work for you, I see them in the pick-n-pull all the time and can be bought real cheap compared to a new one. You can get some lines/hoses/fittings too.

 

[snoopdoggie]

I have one from an Explorer if you want it. PM me your email for pic.

 

[AllanD]

Your Explorer doesn't already have one?

AD

 

[Sasquatch_Ryda]

Should have a cooler in the rad and an aux. cooler infront of the rad. passenger side, they are about 8x10 or so...

 

[94EXPLODER]

I want a bigger tranny cooler for running 33's or should the stock one be sufficient?

 

[Sasquatch_Ryda]

The extra cooling won't hurt anything. I replaced my stock one with a 12x20 flex-a-lite tranny cooler.

 

[94EXPLODER]

ok, how do they install..just find a place to mount it and switch the lines?

 

[Sasquatch_Ryda]

I just removed the factory one, hooked the lines up to the new cooler with the supplyed clamps and mounted it onto the radiator with the supplyed hold downs for it. They are a plastic 'bolt' that you put through the fins of the rad and the cooler and then tighten down the plastic nuts that come with it. Everything came with my cooler that I bought.

 

[94EXPLODER]

do you have pictures

 

[Sasquatch_Ryda]

No, but I could grab some.

 

[94EXPLODER]

cool, thanks...in your opinion..does the A4LD suck like everyone else says..because after i get all the little lift things sorted out im going to rebuild my trans....just some input is all im lookin for..
Thanks

 

[Ranger#1]

look for my build thread i got some there