Photos of Lifted RBV's With Different Lift & Tire Sizes

[Cooke15]

33x12.5

shacklelift AAL's and Torsion crank. No rubbing

 

[t5cents]

1998 ford ranger got it for 800 bucks 2 weeks ago with no compression in one cylinder and found a bent valve..with $100 worth of gaskets and a new valve lapped in it runs perfect....has no lift and 235/75/r15 and soon puttin on some 265/75/r16 on mickey Thompson classic 2 and i like c-note's truck and later will probably buy some fender flares, a set of 4.56's a rear locker and some 35's

 

[dirtdudekx250]

The Ranger

This is my 1990 Ford Ranger with 37x12.50x16 TSL SSR, on 16x10's Rock Crawler steel wheel, 5.5 superlift Lift, 2 body, explorer Leaf springs, 1'' coil spring spacers, Dana 35 front axle, 95 explorer rear axle w/ rear disk...also has a 2.9L bored .040 over, with Aftermarket cam, 5.0L fuel injectors, complete Accel Ignition, 58mm Throttle body, Honda Civic intake, PowderCoated Pacesetter Headers, custom 3" to muffler(Cherry Bomb, 2 Chamber) 2 1/4 dual outlets...

 

[rangersteve]

dirtdudekx250, love your truck!!!!! Do you have any more pics.

 

[dirtdudekx250]

Ranger

Thanks RangerSteve...and I think i may have some build up pics on it...If your interested...:icon_thumby:

 

[Destroyer000]

95 ranger 5inch lift 33s

 

[Cool Hand Leuk]

My 2002 Edge

My Old Setup BFG AT 31x10.5x15s no Torsion Cranking, and removed Factory 2" Rear Lift Blocks. They rub at full steering lock but just a little

 

[74duster318]

3" body, 4" suspension, 33x12.5's.:icon_hornsup:
________
Alaska Dispensary

 

[Cool Hand Leuk]

My New Pizza Cutters

My new Goodyear Wrangle AT/Ss 235/85R16 (32"x9.5" for the metric challenged) on Ranger 16"x7" with 3.75" backspace. These fit perfect on my Stock EDGE suspension without Torsion cranking. I can turn lock to lock with no rubbing. I chose this setup to get maximal tire height/ground clearance while also having good gas mileage with snow and rain performance. I love this setup so far, great in the snow and ice we have right now. This setup weighs about 61lbs/Tire+Wheel.

I bought these wheels after I tried a set of 2005 Mountaineer wheels sat so far in the wheels hit the a-arm when turning, apparently both the Explorer and Mountaineer now run alot of backspace on the later models and you will need spacers to make em work.

 

[okietheranger]

 

[bombsquad]

Hey nice trucks yall!!!

 

[okietheranger]

[/IMG]

 

[86ford]

2-3 inches of suspension lift running 33 12.5 15s on 15x8 rims.

86

 

[krazykracker]

2-3 inches of suspension lift running 33 12.5 15s on 15x8 rims.

86

hey 86 you got any pics of those radius arms?

 

[trxusrngr]

Flares

Hey guys, i finally got the new flares on. What do you guys think? Keep??-Rip Off??

:icon_confused:​

 

[Mechanickid]

looks good! now make it 4x4.

 

[choped84]

84 bronco 2, 5 speed. 235/75/15

my sisters 85 bronco 2, 300I6 and aod tranny on 35's

 

[rideabikenick]

3" spindle lift, AAL and Shackels w/33s & 16s

 

[traildevil67]

85 ranger xl 3" body lift stupid coil spreaders in front coils 31x10.5 Firestone atx's on 15x7 rims, and 302 c4 combo.

 

[036speed]

That is cool Ranger

1991 Ranger XLT, 6" suspension lift, 3" body lift, cut out entire stock flare, Flexy Flares, 35x12.50R15 MT's on 15X8 wagon wheels.

(I think the first pic is better but I'll leave that up to you)

Ryan