Search results

Is there anything else that tells the parking brake light to come on? Other than the plastic spring sensor on the parking brake pedal?? For some reason my light is always on, I tried un-plugging and replacing and light is still always on?? Any info

I got an 8.8 out of an Explorer for my 89 bronco ii. I'm in the process of welding in the spring pads as well is finding the pinion angle. I'm running explorer leaf springs and 3" blocks. I have the axle hanging with drive shalf on. Right now the blocks are not welded. The angle of the...

Looking for some lift shackes for my bronco. I'm running a Ford 8.8 Rear now, and I dont want to keep my lift blocks. The blocks I have are 3", so what size shackes would I need? And were could I fine them? Still running the stock left spring with a add a leaf. At some point will upgrade...

Using a Ford 8.8 that came off an 91 Explorer. Do you have to use C-clip elminators or can you still use the C-Clips?

Finally got around to putting some pictures of my bumper I just build. Work in progress. Still have more work to do, but the idea is there..

On an 89 bronco II with a 2.9,were is the crankshalf position sensor located.

Have an 89 bronco ii. Was running fine, drove all day. Started and stop it. Was driving home and pull over to side of road for a min. Bronco was idleing and then die. It sounded like it ran out of gas. Trying to re start and will not start. Has plenty of gas. Got it home and checked fuel...

Hey just got my b2 back together again. I rebuild the motor and everything is new on her. I have put about a 150 miles on the rebuild now, and I went for a longer drive yesterday, and I was going up a hill and the motor started to knock. It only knocks going up hills, flat fine, freeway fine...

I have had a lot of question about this, so I thought I would share. Basically I used 1" by 1/8" steel and cut and drilled and welded to the pillar. I grinded a little of the window frame cover. But it was a really easy thing to do, and a nice look. Always liked it on the jeeps, but not a...

Was wondering if anyone knows the range the fuel psi should be for an 89 bronco ii,

Got a 90 b2 with a 4.0, and things have been great for years, and I am having a problem with the parking light and dash lights. Will be drive and 15mins or so into the drive the fluse will pop and the lights go dark. Im guessing a wire is grounding out somewhere on the car, but was hoping...

I am look of an 89 to 90 spare tire Carrier, but only the latch. Being going to the junk yardS around my house and can't fine the one I am looking for. I purchase the one in picture with only the two hole mount off an 87 b2, and even thinking to look at my other b2's first, b blasted it and...

I broke the passenger glass on the trail this weekend, and was trying to figure out how to get the old one out and the new one in. Does anyone have any pointer in doing this job? I have some parts b2 with good glass in them, just was not sure how to pull the glass out of the door. Its a power...

Does a Ranger Rear glass fit in a Bronco ii rear window????

I have a 90 bronco ii and I am looking for a new Rear Window Seal. Anyone know if they still sale them.. I tryed LMC, Ford, and even a windowshield company.....no luck. Anymore, thanks

1989 B2 6in skyjacker, 33 BFG's, Dana 35, 8.8 rear,

Anyone know if they still make the 89 or 90 style Bronco II logo. I am repainting my b2 and have only found the older style b2 logo. Any info would be great Thanks

Does anyone know the stock fan with fan clutch CFM? I put an Electra-Fan on my car, and I am running warmer. The fan could be under powered. Any info would be great. Thanks

I have an 89 bronco II, with a 2.9L and I can’t get it to crank over. I have two new starters, new relay, new battery, and new battery cables. All I get is the starter barely to crank, and then the battery cables smoke, and sometimes the relay will get stuck. I even tried a remote starter...

I have an 89 bronco II with engine problems. I started with replacing the injectors, fuel pump, fuel fillter, maping sensor, and idle regulator. Checked the upper intake for leaks, no leaks, checked vacuum lines, pretty sure fixed all the leaks. The bronco is still having troubles starting on...