1984 b2 chassis part out 2.8 engine to.

[Quick draw]

I have front and rear diff's, tranny 5 speed no transfer case.
Any thing but frame, I cut it up, and body mounts they stayed with cab.
Engine is wore out but all parts are on it.
Will be hauling it off soon to scrap.
So let me know if you need any thing.

 

[shadetreebronco]

I have front and rear diff's, tranny 5 speed no transfer case.
Any thing but frame, I cut it up, and body mounts they stayed with cab.
Engine is wore out but all parts are on it.
Will be hauling it off soon to scrap.
So let me know if you need any thing.

Where are you located ?

 

[wild horse]

Ditto on where ya at ?

 

[Quick draw]

Sorry guys , Denton Texas

 

[wild horse]

Ok too far for me.

 

[Quick draw]

Sorry, would like it to be used, any body? Will have to haul off next week.

 

[shadetreebronco]

I am interested in the alternator adjusting bracket , rear dome light , blue interior parts if you have them and feel like shipping to CT ?

 

[Quick draw]

I'm keeping the body, sorry, but any motor or drivetrain parts except transfer case, is up to go.
If you pay shipping I'll send it

 

[Melo]

Do you have the tube that goes from the air cleaner to the grille?

 

[clphelon]

I need the harmonic balancer, flywheel and fuel pump if you have them. Rebuilding my father's '84 for him.
I'm in Iowa but have a buddy in Houston TX, would you be willing to ship there? PM me w some pics if you could, as well as prices and conditions.
I just found this forum trying to find parts for the truck.
Thanks

 

[Quick draw]

Melo, I'll have to check . Il be working a long day tomorrow but wil look Saturday .

 

[Quick draw]

Clphelon, I'll get you Picts Saturday as well, condition , it was running fine other than motor was tired . Prices?
Shipping covered a must . If you feel inclined to give more for my time to pull parts so be it. Not asking for it though.
Just thought if some one needed it , I rather you have it. I'll make pennies on scrap prices.

 

[Quick draw]

I'm off next week and will be hauling it off by end of week. Don't have space for it . As it in sitting in front of body that I need to put new frame under..
This has been sitting for three years.
Picts will be posted Saturday or Sunday , of all I have that is to go. Also have radiator that was good , not leaking when I parked it.

 

[broncbuster]

Hi. Just wondering if you have the passenger side radius arm and how much shipped to 75570. Thanks, Eddie

 

[Quick draw]

Sorry guys my Friday job ran into Saturday .
Supposed to rain here Sunday and Monday , but will get Picts as soon as I can.
I do have all suspension parts. Eddie.

 

[broncbuster]

Ok great! How much you want for it? I also need a side glass passenger side if you got one or know where to get one. I'm only a couple hrs away.

 

[JoshT]

I know you said that you cut up the frame, but is the rear cross member still in one piece by any chance?

I think I'd like to buy it if available, also depending on shipping to 31030 zip code in Fort Valley, GA. FWIW I've already had the FWD tank cross member shipped to me from someone else and it was reasonable.

I'm putting a BII tank behind the axle in a ranger street truck, and want it to be mounted up nice. Turns out that the rear cross member aren't as much the same as I thought.

 

[Quick draw]

Pictures are on now .

 

[Quick draw]

Josh I have it , but I'm using the tank in this frame , I'm not sure yet if I'm using the crossmember yet. But I may , I'll be working that out soon as I get transmission back so I can start setting body back on new frame, which is an f150 frame and is wider, so I haven't worked out body mounts yet.

 

[JoshT]

Cool, figured that might be the case, but if you don't use it let me know please.

I've also got a pic and info request, but I'll send those in a PM.