jkufen
New member
- Joined
- Mar 29, 2012
- Messages
- 490
- Reaction score
- 1
- Points
- 0
- Location
- Charleston, SC
- Vehicle Year
- 1986, 1991
- Vehicle
- Ford
- Engine Size
- 2.9, 4.0
Well I went to a buddies house last night to help get his old Toyota running and after about 3 hours there I tried to leave and my b2 wouldn't crank. It just keep spinning and spinning. Well I am very familiar with a bad fuel pump as this is my 3rd. I towed it home and got underneath it today. I pulled the pump out and hot wired it to the battery. The pump came on just fine. I then put my volt meter on the power connections to the fuel pump and nothing. The relay is brand new and just had the new plug wired in by my mechanic. The relay clicks when I turn the key. So I am guessing that the issue is electrical between the relay and the high pressure pump. Any ideas where to start looking? I mean I tried to run the wires back from the pump but I only got about a foot before it hit the main cluster and I lost it. Need suggestions please. I got to get her running ASAP!