89 bronco II help please !!!!!!

[fubared692000]

i have an 89 bronco II that was my dads he gave it to me i was a chevy guy but have seen the light lol how big of a tire can i get on a bone stock bronco II without a lift at all or cutting fenders or rubbing fender wells ???? please help me i hate the 205 75 r 15 on it now could i maybe run a 255 ??

 

[4x4junkie]

Should read the sticky posts at the top, the answer to your Q is contained within

http://www.therangerstation.com/forums/announcement.php?f=48

 

[ibleedford]

my buddy has 33's under his

 

[fubared692000]

its got 33's without a lift of any kind do they rub on body or did he cut fenders?

 

[ibleedford]

nope no rub at all and they have big side lugs too and no rub....only if he is like cranking on it too turn will it rub thats all

 

[4x4junkie]

33s will NOT fit under a stock '89, period.
On a '93up they will fit IF they are narrow 33s (33x10.50R15), but not on earlier trucks.

 

[ibleedford]

would u like a pic of the 33's under it 4x4 junkie.... becuase he and it is sitting right beside me laughing

 

[4x4junkie]

Only if you want someone to tell you what obviously isn't stock on it (or that the tires are infact NOT 33s).

 

[Original_Ranger84]

Yeah! No F-ing way a 33" will fit under a bone stock BII or ranger. I have a 3" body lift and it fit 31's possibly could go 32's on my 84'. No way in hell is 33's gonna fit under a unlifted BII.

I would say 30x9.50R15's is the biggest you want to go, if you don't want any lift or anything. They will fill out well.

 

[ibleedford]

http://

[/IMG]

 

[ibleedford]

[/IMG]

 

[ibleedford]

[/IMG]

 

[jdm_farmboy]

You need some good frame and suspension shots to really prove its not lifted. And it definitely looks like it is.

 

[ibleedford]

ok its not even my truck to brag about so i would not lie about the lift (that is not there) we have pulled the front end of the truck several times.... and i have never seen any kind of lift at all....

 

[Original_Ranger84]

It has to be! I have a 3" BL and the completely bald 33 I tested barely clears the fender tips! Thats lifted the springs are for sure bigger than stock. maybe no drop brackets but its got bigger coils and stuff.

 

[Mountanman83]

i have an 89 bronco II that was my dads he gave it to me i was a chevy guy but have seen the light lol how big of a tire can i get on a bone stock bronco II without a lift at all or cutting fenders or rubbing fender wells ???? please help me i hate the 205 75 r 15 on it now could i maybe run a 255 ??

I know for sure you can run 235's comfortably not so sure on 255's

 

[ibleedford]

look.... me and him rebuilt this b2 from the ground up.... there is nothing else i can say but we putt (all) stock parts back in it from a ranger his dad had...thats all....

 

[slobby351]

ok it is my b2 there are cargo colis no drop brackes stock springs in there rear air shocks. till i put the 8.8 in it now 4 inch shakles and stock blocks

 

[4x4junkie]

Yeah, that thing's not sitting at stock height for sure.

This is stock height for a BII (which does not have rear blocks):

No way 33s are fitting under that without some serious fender cutting.

 

[jdm_farmboy]

ok it is my b2 there are cargo colis no drop brackes stock springs in there rear air shocks. till i put the 8.8 in it now 4 inch shakles and stock blocks

What are cargo Coils? Bronco II's don't have stock blocks which means there is at least a lift there.