TXBII
New member
- Joined
- Sep 17, 2013
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1989
- Vehicle
- Ford
- Engine Size
- 2.9 for now..
I have an 89 BII and got a set of Explorer Leaf springs for it because the old ones were shot. When I added the Explorer leafs with stock shackles it added some lift to the rear. To level out the front I could get some leveling coils because it only added about 2 inches.
My question is if I also got a set of the Chevy Drop Shackles as well and added them to the rear, what front coil springs would I need to get to level out my BII? And what shocks and sizes do you guys recommend? (need new shocks bad all the way around..)
Finally, is this a good idea? Is there anything else I would need to replace/change? I plan on making some extended radius arms later on.
If this is an "OK" idea, how much lift should this give me, guestimate? Trying to achieve about 4 inches of suspension lift..I already have a 2in body lift.
Thanks for everyone's time!!!!
My question is if I also got a set of the Chevy Drop Shackles as well and added them to the rear, what front coil springs would I need to get to level out my BII? And what shocks and sizes do you guys recommend? (need new shocks bad all the way around..)
Finally, is this a good idea? Is there anything else I would need to replace/change? I plan on making some extended radius arms later on.
If this is an "OK" idea, how much lift should this give me, guestimate? Trying to achieve about 4 inches of suspension lift..I already have a 2in body lift.
Thanks for everyone's time!!!!