Phantom
New member
- Joined
- Jul 13, 2013
- Messages
- 61
- Reaction score
- 0
- Points
- 0
- Location
- Salida CA
- Vehicle Year
- 1988
- Vehicle
- Ford
Not completed but a good start.
Started with some 6"x3" 1/4 wall tubing, and a wheel hub from a small trailer.
Mocked it up with jack stands, took some 2"1/4" wall square tubing for the lower support
Then some 2" 3/16 wall for uprights and supports
Placed a 32" tire from the explorer which will soon be a matching 33"
tire.. I thought I had it all figured out and the I built the damn thing to high, so a few cuts and re building and should be were I want it..
Should have finished pics soon, with paint and locking latch installed..
Started with some 6"x3" 1/4 wall tubing, and a wheel hub from a small trailer.
Mocked it up with jack stands, took some 2"1/4" wall square tubing for the lower support
Then some 2" 3/16 wall for uprights and supports
Placed a 32" tire from the explorer which will soon be a matching 33"
tire.. I thought I had it all figured out and the I built the damn thing to high, so a few cuts and re building and should be were I want it..
Should have finished pics soon, with paint and locking latch installed..