lethal-threat-b288's b2 and ranger builds

[lethal-threat-b288]

Got it done and painted. Now gotta figure out what to change first!

 

[lethal-threat-b288]

Now im giving my specs on my builds, ranger first!

Mods include as follows: 1/4" wheel spacers, diamond headlight/corners silverstar bulbs, 2 hella500's 55w and 2 desertfox 100w driving lights both wired with relays, k&n drop in filter intake muffler delete, 8mm wires bosch platnium4 spark plugs, i love my truck sticker on the dash, lizard on my cluster no its fake! Sony xplod cd player, Exhaust: header, cat delete, flowmaster 40 series single, dual Z06 flowmaster stamped tip. Soon to be: fabbed bumpers front with a police push bumper and winch mount, rear with reciever and reverse aux lights. Suspension: front washer lift & explorer coils in front and leafs packed together in the rear! Bed mounted spare. Performance upgrades: 4.0L, m50d4x4 conversion. D35/8.8. More aux hellas and true dual flowmasters exiting in front of back tires. 31x10.50/15 mt's.*

Thoughts on the plans?

 

[4x4b2]

that ranger is 2wd right?

 

[lethal-threat-b288]

Now its the BroncoII's turn to shine.
Mods include k&n filter, moded airbox for snorkel and totaly sealed, msd coil, 6"suspension lift 33x12.50/15 dick cepek mud country's on moto metal wheels 15x9. D28/7.5 2.9L v6 a4ld bw1354 manual, shortened navajo rear driveshaft(destroyed gkn shaft), gutted cat, flowmaster knockoff single chamber dual out muffler, custom dual exhaust by me, rough country shocks, classII RESSE hitch, cobra cb antenna on bumper(rear), P.A. Under the hood, LED tail bulbs, aux reverse lights, removable doors, panasonic cd stereo 2 pioneer 6x9s in a bass box for 10" subs, autoguage oil press and eng temp guages. Led aux lights in cab. Strobes in turn sigs Fabbed front bumper... Soon to be: fabbed rear bumper d35/8.8 mabey 4.56's and locked, warn hubs, disc brake vers on 8.8, complete brake upgrade from exploder, 4.0L offroad cam a4ld newer. Beef up suspension and anti wrap bars rear long travel front via extended radius arms, Sliders connected to bumpers over wheel wells. Rhino line interior. Ranger seats, winch on front. Hid headlights and hella700ff's, eletric fan, 10" subs mounted high? Or just mount the 6x9's high or in sides. Highlift on rack as well as
Shovel. Tire carrier on bumper. Thats all for now enjoy pics

 

[lethal-threat-b288]

Fancy, but do you think it will hold up under a recovery?

It did while it was tacked. Not complete. Got pulled out and bent a mounting bolt not the bumper. Heres where it happened

 

[Bennybooster]

It did while it was tacked. Not complete. Got pulled out and bent a mounting bolt not the bumper. Heres where it happened

I was making a joke about the cardboard when I said that, lol

 

[lethal-threat-b288]

Oh hahaha

 

[lethal-threat-b288]

that ranger is 2wd right?

Yup:icon_bounceblue:

 

[Ranger Sport Honduras]

the bronco bumper ended up looking good man.

nice plans for both rigs.

 

[lethal-threat-b288]

Thanks dude

 

[lethal-threat-b288]

Poser shots now

 

[lethal-threat-b288]

My electric fan upgrade. Fan is from a 95 ford Taurus 3.8L v6 it's a 2 speed hi&lo fan I have Made a harness strong enough to support the fan in both speeds 1 relay for hi and 1 for low and I have a 3 position switch. It's hooked up and tested out Awsome! My 2.9 runs at 180 on low and 160 on high and I have more power now. I highly recommend doing this regardless of engine size.

And I found these in a junkyard today!

 

[lethal-threat-b288]

painted the left side to match the rest of the body today?

 

[86MUDRCJ]

I like that b2 and i wouldnt mind havin that tire/wheel combo.

 

[lethal-threat-b288]

id like the wheels better if they were offset diffrently. more twards the out not tucked in. i want some steel wheels now, and to top it off i have an eletrical issue now, i have no power inside it

 

[lethal-threat-b288]

also a little update: i got a throttle body from an 86 2.9L ranger its way bigger diamiter than my 88's ill be installing it after i get er goin again. keep an eye out!

 

[lethal-threat-b288]

:icon_thumby:

 

[lethal-threat-b288]

So. I got er fixed and goin again!!! Little yellow bugger that I have no clue what it is but I got it fixed... Also I installed the throttle body.

 

[WoodyB2]

Nice looking rigs you got there...i like the blue white combo.

 

[lethal-threat-b288]

Nice looking rigs you got there...i like the blue white combo.

Thanks bud. Sooner or later it's gunna be changed to olive drab matte. With black wheels.