my B2

[NMB2]

i think your dd needs a 4 inch lift and 33's, and to get rid of those stupid bling rims but anyways the skidplate looks good, the dd is nice looking, i just dont like those rims

rims came off of a Jeep on 37's. they are 17" Helo MAXX6. paid $20 for them... f-it. Tires on them are like 32's. rub in the front when i turn and hit bump. Ive thought about lifting it.

Thanks on the skidplate though.

 

[4x4b2]

hell for $20 thats a damn good deal man, id buy em and sell em though, does it have any lift at all? because i thought they had to be lifted to fit 31's?

 

[NMB2]

no lift. Just rolled fenders/wheel wells. 265/70r17

 

[4x4b2]

nice

 

[NMB2]

aiming to hit clayton july 2- 6 time frame. Truck is basically ready at this point in my opinion.

 

[NMB2]

more goodies came in the mail today, Ive been needing some of these badly, just never knew they existed!!:icon_twisted:

one will be front center, the other two will be rear corners.

 

[lepp1892]

Excuse my dumbness, but what are they?

 

[Ranger Kip]

Can I see a pick of Sammi?

 

[NMB2]

Excuse my dumbness, but what are they?

http://www.autoperformanceengineering.com/html/pickups.html

Can I see a pick of Sammi?

Ya, I'll take pics of it soon, I'm about to swap toyota axles under it.

 

[Ranger Kip]

Cool, nice things they are, neat lookin

 

[NMB2]

updated page one for a quick glimpse instead ofsearching through build.

did I forget anything?

 

[RUTH]

did you get that fuel p.u installed?? does it seem to help, im running a fuell cell and when the damn thing gets low, ill suck air sometimes, refueling fixes the problem, but it just bothers me, id rather almost run out, than be like, " hang on guys, im down to 3 gallons, have to fuel up..

awesome rig by the way... ive often thought about cutting the whole back of my b2 off too, but im scared..

 

[NMB2]

did you get that fuel p.u installed?? does it seem to help, im running a fuell cell and when the damn thing gets low, ill suck air sometimes, refueling fixes the problem, but it just bothers me, id rather almost run out, than be like, " hang on guys, im down to 3 gallons, have to fuel up..

awesome rig by the way... ive often thought about cutting the whole back of my b2 off too, but im scared..

Yes, they made 100% difference on my clayton trip. I didnt suck air or spudder one single time, the entire trip.

Incase you missed that wheeling trip, here are the pictures/video -

here is the Highlight reel of the weekend:
http://www.youtube.com/watch?v=mmieOmrp8zg


here are individual pictures:
http://www.supermotors.net/registry/9499/74004

 

[xkotyx]

amazing build!

 

[redneckranger12]

2.8l

im 16 and just bought my first truck its a 84' ford ranger, with im pretty sure the same 2.8l as your bronco. anyways i noticed in your engine compartment all the eev IV computer shit, and all the wires for the sensors are gone. can i take all that out and it'll still run ok? i was wondering how you did it?

thanx

 

[NMB2]

amazing build!

Thanks!

im 16 and just bought my first truck its a 84' ford ranger, with im pretty sure the same 2.8l as your bronco. anyways i noticed in your engine compartment all the eev IV computer shit, and all the wires for the sensors are gone. can i take all that out and it'll still run ok? i was wondering how you did it?

thanx

Look up the Duraspark II conversion in the technical library. If you have any questions after reading that, just shoot me a PM and I'll explain anything you dont understand to you. :icon_thumby:

 

[ranger8689]

Did you build your own hi steer arms? if so how far into the knuckle did you tap. I'm interested in doing this as well to a ball joint dana 60

 

[NMB2]

Did you build your own hi steer arms? if so how far into the knuckle did you tap. I'm interested in doing this as well to a ball joint dana 60

yes i built my own. I drilled and tapped all the way through.

 

[89REDRANGER]

Just curious...what's this rig measure lift-wise over stock??? It looks pretty low and I've got plans for a similar build with a tretched wheelbase, but I wanna keep the roof, windows and re-tub the rear fenders so my daughter can keep warm in the Winter.

 

[NMB2]

Just curious...what's this rig measure lift-wise over stock??? It looks pretty low and I've got plans for a similar build with a tretched wheelbase, but I wanna keep the roof, windows and re-tub the rear fenders so my daughter can keep warm in the Winter.

about 3.5" over stock.


Some updates.... the B2 is getting a new heart