My Small Bronco Grows Up

[oetinger]

Nope,, it should be fine,, it's a mud truck only so most of the time it will be in 4 feet of mud..lol and besides i have a full rollcage

if its just for the big mud pit...Its gonna be perfect :icon_thumby:

 

[85_Ranger4x4]

tire size,, 14.9-24, 50 inch tall

Wow, I was trying to guess if it was a 24" or 26" rim. My smallest tractor has 11.2-24 tires, two sizes smaller.

 

[ufospy]

Well i got a bunch of stuuf done,, i got my panhards in, my Ford 208 to 1410 yoke adapters done and some gusset work done,, there is still a lot to do yet but getting there.
[URL=http://rides.webshots.com/photo/2572584880103635915XAaTGY][/URL]

 

[BONES]

So you built a one link suspension for the front axle? You mind me asking what you used for the link pivot joint? Any closer pics of the front suspension links, frame and diff brackets and all that other fab work you have put under there??

Looks bad ass for sure man!

 

[hoosier1104]

This is epic! Nice work man.

 

[TheTopher]

This is freaking sweet. So what motor do you have to turn those big meats?

 

[ufospy]

Well the 1 that is in it know but will soon be replaced, is a built 302 punched out to a 347 and the 1 that is being built is a 460 bored, but it will not be done until sometime this summer.

 

[ufospy]

[URL=http://rides.webshots.com/photo/2398637040103635915rtUHws][/URL]

[URL=http://rides.webshots.com/photo/2040762500103635915Zaxove][/URL]

[URL=http://rides.webshots.com/photo/2871890110103635915mBxhzg][/URL]

 

[feellnfroggy]

dude you need to fix it, finish it, and then roll it out to the mall on them tiny wheels. Those looks would be worth so much more, LOL

 

[ufospy]

Well added the 6 inch body lift yesterday and got the tranny mount done, make the drive shafts to length, but know have to put a 12 foot door in instead of the 8 ft door we were planning,,lol should be able to roll it out this weekend....wooohoooo

 

[ufospy]

It"s done !!!!!

Well after almost 4 months of work my little truck has grown up some. we got it out of the shop and drove it around to work out the bugs and i am happy to say that it should be ready to go to the boggs. just have a lot of tweeking to do and a bunch of engine rapping to put on. thanks for all the support you all gave me during this change.
IT LIVES !!!!!

[URL=http://rides.webshots.com/photo/2213006610103635915eyjMSX][/URL]

 

[2813josh]

:icon_hornsup: That thing is bad-ass!

 

[TheTopher]

Heyyyy! I've got one of those too!

Lets race!




Just kidding mate, it looks awesome. So did you get the 460 in there like you had mentioned before?

 

[chazzone]

Nice work.

I've been following this since you started posting.

Wondering about the extra-long bumpers, tho...

 

[ufospy]

Well finally got the new graphics done,,, you like? i do!!!!
[URL=http://rides.webshots.com/photo/2266343550103635915pcQAjy][/URL]

 

[ufospy]

we got the 302 out and am going to put a 460 in, i just picked up a set of race heads and ordered a new cam and intake. so looks like i am done for the year until i get the motor done and dynoed, watch out come spring this little truck is going to screem!!!!!!!!!!!!!!!!!!

 

[ufospy]

well here is the first run with the new motor.
http://youtu.be/xCYHRGKf9iA
http://youtu.be/Wl1N2c2vp6g

 

[country0001]

Pretty sweet, I like it.

 

[ufospy]

Pretty sweet, I like it.

thank you. i will post up more video soon. the next run is on the 18th

 

[adsm08]

Well the 1 that is in it know but will soon be replaced, is a built 302 punched out to a 347 and the 1 that is being built is a 460 bored, but it will not be done until sometime this summer.

Well added the 6 inch body lift yesterday and got the tranny mount done, make the drive shafts to length, but know have to put a 12 foot door in instead of the 8 ft door we were planning,,lol should be able to roll it out this weekend....wooohoooo

Do you understand the phonetic and gramatical difference between "know" and "now"?