Superlift Superrunner Steering System with a James Duff 3"

[JuJuTypeB2]

Hey first time posting here at the B2 corral. I just came into ownership of a 89 Bronco 2, after searching the net I came across the Superrunner Steering system. I have read that this setup is must better the stock, I was just wondering if it would work with a James Duff 3 inch lift. Any help would be great! I'll try to post pics later. Thanks in advance.

 

[Ranger44]

4x4Junkie said that the superrunner steering was better suited to a smaller lift around 4". He actually had to extend the centerlink down 2" on his. I think it would be useful at a 3-4" range.

 

[CopyKat]

You should be fine with the non modified one. Only reason I modd'ed mine was that I kept the D44 TRE mounting, which is under the knuckle.

 

[4x4junkie]

Go for it. The Superrunner kit is close to a perfect match with that kit.

 

[Totalled]

Duff kits drive well with a stock arm, and very good with a drop arm. The handling would probably be excellent with a superrunner kit.

 

[JuJuTypeB2]

Thanks for all the help guys. I'll try to get some pics up soon. Right now I'm trying to get some spare time, I have a ton of firewood to saw up and work too. Also I'm pulling the 2.9 out damn oil pump. Now if only I could come across a 90 Ranger with a 4.0 and 5-speed gearbox I would swap, Thanks again.