wont stay running

[rawhiles]

Ive got a 1988 bronco2 with 62,000 miles, ran ok for awhile but started dying and would restart but would die again infrequently. put code scanner on it and got secondary fuel circuit fault (96) Replaced fuel relay, didnt fix, replaced inertia switch, didnt fix, and the high pressure fieul pump and that didnt stop the stalling problem...any ideas??

 

[country0001]

Check the throttle position sensor. Just throwin that out there. Is it a manuel or is it an automatic?

 

[H munster]

Use a gauge and chect the fuel pressure.

 

[rawhiles]

Its a auto trans to answer the 1st and the fuel pressure is a steady 38 psi at the rail ....am going to check all the grounds today....

 

[country0001]

Check ur tranny fluid. On my 92 F150 when the fluid gets low it won't run right